Do it yourself
Frequently asked questions about cars and motorcycles

Brake Pad Replacement

Model: Mercedes Classe C W202 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Brake pads

See other generations:
Video tutorial

Lift the vehicle on a lift (or with a jack) and remove the wheel corresponding to the repair. Using a punch of appropriate diameter and a hammer, extract the central locking pin of the pads (if necessary, spray some penetrating oil), remove the retaining spring, and extract the pads.

Pry between the disc and the brake caliper to retract the caliper piston and create the necessary space to accommodate the new pads. Clean the brake caliper thoroughly, then insert the new pads, position the retaining spring, and reinstall the locking pin, passing it over the spring.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) To change the rear brake pads on a Mercedes C-Class, lift the car with a jack on the side where you will perform the replacement. Remove the wheel an…
Mercedes Classe C (2021-2026 / W206) .. 5 seconds. Use the arrow buttons to navigate to "brake pad replacement" and confirm with OK. Once the replacement is complete, press the OK button two.. …
Mercedes Classe C (2014-2021 / W205) .. and "ok" buttons on the steering wheel. Select "brake pad replacement" and confirm. The system will automatically retract the pistons of the rear calipers.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?

To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically.

Watch the video!


by ScegliAuto

More videos