Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Bumper of a Mercedes C-Class

Model: Mercedes Classe C W205 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Rear bumper

See other generations:
Video tutorial

How to remove the rear bumper of a Mercedes C-Class? Follow these steps carefully. This operation is not too complex if done in order.

First, use a screwdriver (or cordless drill) to remove the screws located at the top of the bumper (along with the rubber seal). Next, remove the plastic rivets located on the sides of the wheel wells.

Once the bumper is free of any screws or rivets, grasp it with your hands and pull it away from the body (disconnect any wiring harness). Install the new bumper into the metal housing.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) .. how to take off the front bumper of a Mercedes C-Class. Lift the hood and secure it, remove the retaining rivets located on the bumper's plastic parts,.. …
Mercedes Classe C (2007-2013 / W204) .. can start, open the rear door of your Mercedes C-Class. Begin by unscrewing and removing all the screws that secure the rear door panel to the door itself... …
Mercedes Classe C (2000-2007 / W203) .. and replace the front bumper of the Mercedes C-Class. First, open the hood of the vehicle and start unscrewing all the mounting screws located above.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?

To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically.

Watch the video!


by ScegliAuto

More videos