Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Replacing the mirror light bulbs of a Mercedes M-Class

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W164 - Years 2005-2011
Part: Side turn signal light bulb
Operation: Replacing the mirror light bulbs of a Mercedes M-Class

Let's see the replacement of the bulbs of the internal indicator of the rear-view mirror of a Mercedes M-Class. Very simple operation. We remove the mirror from the mirror, prying between the frame and the glass (gently so as not to break it). We push the plastic clips with a screwdriver placed in the internal part of the mirror, after this operation, we remove with a lever the cover in the same color as the bodywork. We disconnect the power supply terminals and detach the rear arrow in the mirror (we replace the bulb). Finally we reassemble the new flashing arrow and test the correct functioning of the light.


Posted on 27 November 2023 by ScegliAuto



How to replace the interior mirror indicator bulb on a Mercedes M-Class
Mercedes Classe M (1997-2005 / W163) .. bulb of the rear-view mirror of a Mercedes M-Class. Very simple operation if you proceed in order. We remove the mirror glass, prying between the..
Removing the exterior mirror cap on Mercedes M-Class
Mercedes Classe M (2011-2018 / W166) .. the mirror glass is very simple on Mercedes M-Class: as shown in the video, pry behind it and then disconnect the connector while pulling it out. At..
Replace left mirror bulb Mercedes Ml
Mercedes Classe M (2005-2011 / W164) Do we want to replace the Mercedes Ml mirror bulb? Operation not too difficult, let's see how to do it. We move the mirror of the mirror or remove it

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos