Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove Emblem from Mercedes CLA Hood

Model: Mercedes CLA C117, X117 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Body

See other generations:
Video tutorial

Is the emblem on your Mercedes CLA hood damaged? Here’s how to change it. Detach the emblem located above the front grille as shown in the video. Once the piece is removed, reach in and locate the back of the logo on the hood.

Remove the logo from its housing and prepare to install the new one. Place the emblem securely in the logo holder, press with your hands until the emblem fits perfectly into the holder (tighten from the back). Finally, check that everything is mounted perfectly.

Install the logo above the central grille.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

Resetting the service light of the Mercedes CLA
Resetting the service light of the Mercedes CLA
Mercedes CLA (2019-2025 / C118, X118) Below we will discover the procedure to reset the service maintenance light of the Mercedes CLA. First, we get into the car and start the instrument …
Where to Find the OBD Port on a Mercedes CLA 250
Where to Find the OBD Port on a Mercedes CLA 250
Mercedes CLA (2019-2025 / C118, X118) To gain access to the OBD port of your Mercedes CLA 250 and connect a diagnostic tool, you need to carefully read the following guide and apply it st…
Resetting the Service Reminder on a Mercedes CLA
Resetting the Service Reminder on a Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) Today, we will learn how to reset the service reminder for routine maintenance on a Mercedes CLA. First, get in the vehicle and turn on the ignition.…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos