Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Grille of Mercedes C-Class

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Trim cover

In this video, you will learn how to remove the front grille of the Mercedes Benz C-Class. First, open the hood. Then, remove the plastic cover by turning the levers. At this point, you need to unscrew the screw located underneath with a wrench that secures the grille. Now, from the inside of the grille, press it to detach it from its housing. Simply unclip it and pull it towards you to extract it. Follow the reverse procedure for installation.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Mercedes C-Class
How to Replace the Headlight Bulb on a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. you begin, open the hood of your Mercedes C-Class. Start by unscrewing and removing the rear cover of the bulb. Next, disconnect the electrical connector,.. …
How to Remove the Rear Headlight of a Mercedes C-Class
How to Remove the Rear Headlight of a Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. starting, open the hood of your Mercedes C-Class. Begin by removing the inner fender cover near the headlight you need to take out, unscrewing the.. …
How to Remove the Airbag Unit from the Dashboard of the Mercedes C-Class?
How to Remove the Airbag Unit from the Dashboard of the Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. unit from the passenger side of the Mercedes C-Class, ensure there are no error codes stored in the control unit. Next, disconnect the battery and remove.. …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos