Do it yourself
Frequently asked questions about cars and motorcycles

Removing Front Bumper on Mercedes E-Class

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Front bumper

Do you want to replace the front bumper on your Mercedes E because it's damaged? Here's how to remove it. Lift the hood and secure it, then raise the car on a jack. Remove the fastening screws located at the top of the bumper. Take off the lower center grille. Unscrew the screws located in the splash guards, then remove the remaining screws above the bumper. Unscrew the screws between the bumper and the fender. Pull the bumper off the front of the car by hand. Install the new front bumper onto the front of the Mercedes. Tighten the bumper screws and close the hood.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe E (2009-2016 / W212) .. the front bumper grille of the Mercedes E-Class. First of all, we open the hood of the car and start disconnecting the air intake hose; then we.. …
Mercedes Classe E (2002-2009 / W211) .. and replace the rear bumper of the Mercedes E-Class. First, open the rear trunk door and start removing all the plastic clips found above and below.. …
Mercedes Classe E (2016-2023 / W213) .. Removing the front bumper on the Mercedes E-Class, as shown in this tutorial, is an extremely simple and quick operation. First, open the hood, then.. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos