|
Do it yourself
| |||
| ||||
Removing the Starter Motor from a Mercedes C-Class
Model: Mercedes Classe C
W204
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
In the following video, you will see how to remove the starter motor from a Mercedes C-Class. First, lift the hood: you need to remove the battery and the intake hose. Next, remove the plastic connected to the air hose and take off the metal bracket: you will need to disassemble the turbine shaft, as shown in the video. At this point, from underneath the car, remove a section of the exhaust manifold and the DPF. Remove the part where the lambda sensor is connected so you can take off the metal exhaust shield to access the starter motor: remove the bolts and pull it out!
Updated on 22 March 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(2000-2007 /
W203)
.. you begin, open the hood of your Mercedes C-Class. Start by removing all the hoses and intake manifolds located above the starter motor, loosening.. …
Mercedes Classe C
(2007-2013 /
W204)
.. and replace the starter motor on the Mercedes C-Class 250. First, lift the vehicle and start disconnecting the air conditioning line to access the starter.. …
Mercedes Classe C
(2007-2013 /
W204)
.. replacing the starter motor of the Mercedes C-Class 300 (3.0 V6). First, it will be necessary to lift the vehicle in order to access the starter motor;.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?
To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.077
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |