|
Do it yourself
| |||
| ||||
Instructions for Removing the Front Headlight
Model: Mercedes Classe C
W204
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
To remove the front headlight, you need to detach the bumper: turn the front tire to access the screws securing the wheel well. Move the wheel well away from its position to remove the bumper mounting pins along the inner edge of the fender. Continue by removing the headlight from the engine compartment: disconnect the intake ducts and remove the plastic cover from the grille. Next, remove the mounting pins of the front trim and take it off; also remove the plastic cover located directly on the headlight and then take out the headlight mounting pins. Finally, detach the bumper and remove the headlight from its position by disconnecting the connectors attached to it.
Updated on 5 February 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(2000-2007 /
W203)
In this brief guide, you will find the main instructions for removing and replacing the headlight bulb on the Mercedes C-Class W203. First, open the …
Mercedes Classe C
(2000-2007 /
W203)
Today we will discover the instructions that will allow us to disassemble and replace the low beam bulb of the front headlight of the Mercedes C-Clas…
Mercedes Classe C
(2007-2013 /
W204)
Below are the step-by-step instructions that will allow you to remove and replace the headlight bulb on the Mercedes C-Class. First, open the hood an…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?
To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.059
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |