Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Hood Struts on a Mercedes

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Body

See other generations:
This video is currently unavailable

Use a 14 Torx wrench to remove the bolt as shown in the video. If the gas strut you purchased is not identical to the manufacturer's part, make sure it comes with a bracket for adaptation.

In that case, bolt the bracket in place and attach the support hook to the highest hole where you will mount the spring strut. This is very simple; just push the "female" end of the strut into place against the "male" end mounted on the hood's hatch and inside the compartment.

Repeat the process on the other strut. If the purchased part is identical to the one removed, simply pull it off with force and install the new one.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Open the Hood of the Mercedes A-Class
How to Open the Hood of the Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) In this guide, follow the instructions to open the hood of the Mercedes A-Class in simple steps. First, open the front door on the driver's side and …
How to open the engine hood of the Mercedes A-Class.
How to open the engine hood of the Mercedes A-Class.
Mercedes Classe A (2018-2026 / W177) The instructions in this guide will show us how to open the hood of the Mercedes A-Class, as well as the CLA. First, let's get inside the vehicle and…
How to Open the Hood of the Mercedes Benz A-Class
How to Open the Hood of the Mercedes Benz A-Class
Mercedes Classe A (2012-2018 / W176) This guide shows how to open the hood of the Mercedes A-Class. You can easily access the engine compartment from the driver's position. In fact, ther…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos