Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Cabin Air Filter on Mercedes A-Class

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Cabin air filter

Want to remove the cabin air filter but don't know how? Let's see how to remove the cabin air filter from a Mercedes A-Class. Lift the hood, disconnect the cover located at the top of the compartment (under the windshield). Once the cover is removed, take out the cabin air filter: grasp the filter and pull it upwards. Insert a new air filter into the housing: ensure it fits snugly against the walls of the air box. Reinstall the cover for the filter box and then close the hood.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on a Mercedes A-Class
How to Replace the Cabin Filter on a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. do you replace the cabin filter on a Mercedes A-Class? Let's see how to disassemble and replace the parts: Remove the screws securing the plastic under.. …
How to Change the Cabin Air Filter in a Mercedes A-Class
How to Change the Cabin Air Filter in a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. the cabin air filter in a Mercedes-Benz A-Class, open the hood. Locate the area under the windshield on the passenger side, where the cabin filter.. …
How to Replace the Cabin Air Filter in a Mercedes A-Class?
How to Replace the Cabin Air Filter in a Mercedes A-Class?
Mercedes Classe A (2004-2012 / W169) .. To replace the cabin air filter in a Mercedes A-Class, open the hood to access the upper part of the engine compartment, just below the windshield. Here,.. …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos