Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Slk
    4. : Replacement headlight bulbs on Mercedes SLK

Mercedes Slk - Video tutorial

Model: Mercedes Slk R170, MK 1 - Years 1997-2004
Part: Headlight bulb
Operation: Replacement headlight bulbs on Mercedes SLK

Open the hood and put on the special support rod. If the headlight you are going to work on is the right one, I recommend that you remove the cover of the air filter box, in order to have a little more room to maneuver. At this point it will be child's play to access any headlight bulb: for most of them it is sufficient to disconnect the connector and open the metal catch that holds them in place, and replace with the new bulb before reassembling everything. . For others. Instead, you just have to slightly unscrew the back of the bulb, i.e. the holder.


Posted on 14 January 2024 by ScegliAuto



How to replace low beam bulbs on a Mercedes SLK
Mercedes Slk (1997-2004 / R170, MK 1) In this video tutorial we will see how to remove and how to replace the low beam bulbs in the headlights of a Mercedes SLK. First of all, you need to
How to replace headlight bulbs on Mercedes SLK R171
Mercedes Slk (2004-2011 / MK 2, R171) In today's video we will see the steps to remove and replace the headlight bulbs on a Mercedes SLK R171, second series. First we go to open and lift
How to replace the bulbs of the overhead light in the Mercedes SLK?
Mercedes Slk (1997-2004 / R170, MK 1) In this tutorial, we can see how to replace the bulbs of the ceiling light in the Mercedes SLK, an extremely simple and fast operation. First of all,

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos