Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Slk
    4. : How to replace low beam bulbs on a Mercedes SLK

Mercedes Slk - Video tutorial

Model: Mercedes Slk R170, MK 1 - Years 1997-2004
Part: Headlight bulb
Operation: How to replace low beam bulbs on a Mercedes SLK

In this video tutorial we will see how to remove and how to replace the low beam bulbs in the headlights of a Mercedes SLK. First of all, you need to remove the front headlight: then, unscrew and extract the 10 nut that blocks the bumper, the 8 nut that supports the directional arrow housing and, finally, the nuts that will allow us to successfully remove our headlight . Once the headlight has been extracted and disconnected, we need to remove the black plastic cap that we find on the back of the headlight and which gives us access to the lights: in this case, we extract and fit the new 55 W H7 low beam bulbs. And that's it!


Posted on 22 February 2024 by ScegliAuto



Where are the fuses located in the Mercedes SLK?
Mercedes Slk (2011-2016 / R172, MK 3) The fuses of the Mercedes SLK are divided within the appropriate fuse boxes that are installed on the vehicle: in this car model, two boxes containin
How to replace headlight bulbs on Mercedes SLK R171
Mercedes Slk (2004-2011 / MK 2, R171) In today's video we will see the steps to remove and replace the headlight bulbs on a Mercedes SLK R171, second series. First we go to open and lift
Mercedes Slk fuse box diagram
Mercedes Slk (1997-2004 / R170, MK 1) On this car model of the German house there are two fuse boxes, the first is located in the passenger compartment on the left side of the dashboard,

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos