Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Gl
    4. : Replacement mirror arrow bulb on Mercedes GL320

Mercedes Gl - Video tutorial

Model: Mercedes Gl MK 1, X164 - Years 2006-2012
Part: Side turn signal light bulb
Operation: Replacement mirror arrow bulb on Mercedes GL320

In this video tutorial we will see how to remove and replace the exterior mirror arrow bulb on a Mercedes GL 320, in simple steps. First of all, let's remove the rear-view mirror glass, gently prying the sides and disconnecting the electrical connector; then we try to unclip the mirror frame, using something thin, as shown in the video. At this point we remove the cover and disconnect the light bulb from the ceiling light; we just have to disassemble it and replace it with the new one, applying the reverse procedure!


Posted on 21 January 2024 by ScegliAuto



How to reset the service of the Mercedes Gl
Mercedes Gl (2006-2012 / MK 1, X164) To reset the service on a Mercedes Gl, we start by placing the key in position 1 so that only the srs warning light turns on (do not turn on the igni
How to replace the headlight bulb on the Mercedes GL450
Mercedes Gl (2012-2019 / X166, MK 2) If you need to replace the bulb in one of the front headlights (or both) but you don't know how to do it, don't worry because in the following guide
How to disassemble the window lifter button on the Mercedes GL
Mercedes Gl (2006-2012 / MK 1, X164) Let's see in this video how to remove and replace the window lifter and rearview mirror adjustment button panel of the Mercedes GL. First we open the

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos