|
Do it yourself
| |||
| ||||
Replacing Rear Bulbs on Mercedes C-Class W204
Model: Mercedes Classe C
W204
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
Open the trunk and observe the area behind the affected light assembly. You will notice a small access panel that can be easily opened with a handle. Once you remove this panel, you can also extract the inner housing of the light assembly where the bulbs are attached. Unscrew the burnt-out bulb, whether it is for the reverse light, brake light, or low beam. Reinstall the housing, ensuring it is properly positioned, then close the trunk access panel and check the functionality of the bulbs. As you can see, this is a very simple task. Good luck!
Updated on 12 April 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(2007-2013 /
W204)
.. bulbs of the overhead lights in the Mercedes C-Class W204. First, get inside the car and remove the central overhead light using a thin plastic trim.. …
Mercedes Classe C
(2007-2013 /
W204)
.. the rear seats is performed on a Mercedes C-Class W204, but it is very similar to the Mercedes C-Class W203, so the available video can be used as.. …
Mercedes Classe C
(2007-2013 /
W204)
.. to remove the rear seats of the Mercedes C-Class W204 in simple steps. First, open the rear doors and lift the bench seat upward to detach and remove.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
How to adjust the headlights in the Toyota RAV4?
In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.033
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |