Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to disassemble the radio of the Mercedes C350

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Car stereo
Operation: How to disassemble the radio of the Mercedes C350

How to remove the radio of a Mercedes C-class? Let's see how to remove the radio of our car. To begin with, we remove the molding that runs along the dashboard where the central air vent is located. Once the air vents have been removed, let's unscrew the tightening screws placed in the space where the air vents were mounted with a screwdriver. We take out the radio with our hands and disconnect the cables (power and antenna). To carry out the assembly, we proceed in reverse the disassembly operations. We fix the new car radio in the dashboard: we use a non-original radio adapter.


Posted on 30 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2007-2013 - What problems can there be on the car radio of the Mercedes C220 CDI? Read Answer
    • Classe C 2007-2013 - What problems with the car radio of the Mercedes C-Class? Read Answer
    • Classe C 2000-2007 - Car radio fuse on Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos