Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Timing Belt on Mercedes A-Class W168

Model: Mercedes Classe A W168 - Years 1997-2004
Part: Timing belt

In this video tutorial, you will see the main instructions on how to replace the timing belt on a Mercedes A-Class W168. First, obtain the new belt of the correct type (find the code printed on the belt itself); to remove the belt, you need to lift the vehicle: then, use a wrench to loosen the belt tensioner and remove the belt. At this point, install the new one, placing it in the correct direction and pulling the tensioner before releasing it; ensure that the belt is correctly installed by turning the pulleys with the wrench.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt on the Mercedes A-Class
Guide to Replacing the Timing Belt on the Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) Today's guide shows the main instructions on how to remove and replace the timing belt on the Mercedes A-Class with a Renault engine. First, open the…
Replacing the Timing Belt on a Mercedes A-Class
Replacing the Timing Belt on a Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) Today's main steps will show you how to remove and replace the timing belt on a Mercedes A-Class. First, lift the vehicle and start by removing the f…
How to Replace the Serpentine Belt on a Mercedes A-Class
How to Replace the Serpentine Belt on a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. to replace the serpentine belt on the Mercedes A-Class W168. This procedure is similar for A-Class (W169), B-Class (W245), and Vaneo (W414). However,.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos