Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Mercedes A-Class

Model: Mercedes Classe A W168 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Tail light bulb

See other generations:
Video tutorial

Before you can start, open the trunk of your Mercedes A-Class. Begin by unclipping and moving the side cover of the cargo area.

Then, unscrew and remove the internal bolts that secure the rear light to the vehicle. After that, pull out the light, and disconnect the electrical connector.

This will give you access to the bulb holder. Next, unclip the clips that hold the bulb holder to the rear light.

At this point, unclip and remove the burnt-out bulb. Once you complete this last step, you will have finished the disassembly.


Updated on 15 April 2026 by ScegliAuto


Related tutorials

How to Change the Rear Headlight Bulb in a Mercedes A-Class
How to Change the Rear Headlight Bulb in a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. the rear headlight bulb in a Mercedes-Benz A-Class, open the trunk and remove the side panel of the trunk corresponding to the affected light. Behind.. …
How to Replace the Rear Headlight Bulb on a Mercedes A-Class W169
How to Replace the Rear Headlight Bulb on a Mercedes A-Class W169
Mercedes Classe A (2004-2012 / W169) .. the rear headlight bulb on your Mercedes A-Class W169 (2004-2012), follow the steps outlined in this mini guide. First, ensure that you have parked.. …
How to replace the rear headlight bulb of the Mercedes A-Class
How to replace the rear headlight bulb of the Mercedes A-Class
Mercedes Classe A (2018-2026 / W177) .. the rear headlight bulb of the Mercedes A-Class. To access the bulb, you need to open the trunk and remove the side cover located in the direction.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos