Do it yourself
Frequently asked questions about cars and motorcycles

Timing Belt Replacement

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Timing belt

See other generations:
Video tutorial

Replacing the timing belt is a delicate operation, advisable only for experienced individuals. Obtain the vehicle's maintenance manual, replacement belts, tensioner pulleys, tensioners, the belt installation diagram, and special tools.

Start by removing the cover that needs to be taken off. Using a wrench and the appropriate tool, lock the pulley and loosen the tensioner. Leverage the tensioner to relieve the tension and remove the belt.

Remove the bolts from the two tensioner supports and take them out. Replace the pulleys and tensioners with the new parts, ensuring all components are reassembled correctly. Install the tensioners and new belts following the assembly diagram.

Reattach the cover.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) To replace the timing belt on a Mercedes C-Class, open the hood to access the components in the engine compartment. At the front of the engine block,…
Mercedes Classe C (2014-2021 / W205) This video explains what is done to your Mercedes-Benz C-Class 2203/204/205 during the A1 to A9 service intervals. Service A is the basic service: en…
Mercedes Classe C (1983-1993 / ) Brake rotors are a crucial part of vehicle safety and, of course, for the people on board. This component of the vehicle must be replaced immediately…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos