Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How Does the Automatic Gearbox Work in the Mercedes B-Class?

Model: Mercedes Classe B W246, MK 2 - Years 2011-2019
Part: Transmission

To use the automatic gearbox in the Mercedes B-Class correctly, enter the cabin and start the vehicle by pressing the relevant button. To position the gear lever in "Drive", pull the lever downwards, as indicated by the letter D. To engage reverse, push the lever upwards, while to put the car in "Parking", press the button located on the side of the lever as indicated by the letter P. When you turn off the vehicle, it remains in "Parking" and the handbrake is automatically activated.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Unlock the Automatic Gearbox of the Mercedes B-Class
How to Unlock the Automatic Gearbox of the Mercedes B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) .. If the battery of your Mercedes B-Class runs flat, not only will it prevent the engine from starting, but the lack of electrical power.. …
How do you reset the automatic gearbox of the Mercedes Class B?
How do you reset the automatic gearbox of the Mercedes Class B?
Mercedes Classe B (2011-2019 / W246, MK 2) .. To reset the automatic gearbox on the Mercedes C-Class, you will need to turn on the instrument panel by turning the key inside the ignition block. Once.. …
How to Replace the Automatic Gearbox Oil in the Mercedes-Benz B-Class
How to Replace the Automatic Gearbox Oil in the Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) .. the automatic gearbox oil in the Mercedes-Benz B-Class, lift the car to access the components underneath the engine compartment. Here, you will need to.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos