Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Gla
    4. : How do you replace the headlight on the Mercedes GLA?

Mercedes Gla - Video tutorial

Model: Mercedes Gla W156, MK 1 - Years 2013-2019
Part: Light bulb
Operation: How do you replace the headlight on the Mercedes GLA?

In order to replace the headlight of the Mercedes GLA, the clips that secure the molding around the front wheel arch must be released. This will allow you to remove the rivets inside the wheel arch: under the cover fixed by the rivets there will be some bolts to loosen. Once the operation has been done on both sides and the bolts on the top of the bumper have been loosened, it will need to be removed. At this point, all the Allen screws that secure the optical unit must be loosened and the light can be removed, after having unhooked the connector. Then it will be possible to insert the new fixture and connect it to its connector.


Posted on 25 February 2024 by ScegliAuto



Mercedes GLA headlight bulb replacement
Mercedes Gla (2013-2019 / W156, MK 1) In this video tutorial we will see how to remove and replace the headlight bulb of a Mercedes GLA. First we open the bonnet of our car and go: then w
How to replace the headlight bulb on the Mercedes GLA 250
Mercedes Gla (2013-2019 / W156, MK 1) If you own a Mercedes GLA first series (year 2015) and you want to find out how to replace the headlight bulb completely independently and safely, th
Where is the OBD port located on the 2017 Mercedes GLA?
Mercedes Gla (2013-2019 / W156, MK 1) If you own a 2017 Mercedes GLA and want to find out where the OBD port is located to connect any compatible diagnostic tool, then all you have to do

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos