Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe A
    4. : How to remove the rear door panels in the Mercedes A-Class w169?

Mercedes Classe A - Video tutorial

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Door panel
Operation: How to remove the rear door panels in the Mercedes A-Class w169?

The removal of the rear door panels, in the Mercedes A-Class w169, is very simple as we can see from the attached video guide. We first need a flat-tipped screwdriver and a Torx-type screwdriver. Let's start by removing the plastic cover behind the handle, which covers two Torx screws. We remove the two screws and move to the window lifter handle. Behind it, near the attachment point, is a plastic clip that acts as a lock to the pin. As shown in the video, we unlock this clip by lifting it first on one side and then on the other, using the flat tip screwdriver. Once the lock and therefore the handle have been removed, all that remains is to pull the panel and disengage it from the door frame.


Posted on 7 March 2024 by ScegliAuto



Activate Mercedes A-Class W169 automatic door lock
Mercedes Classe A (2004-2012 / W169) .. see how to apply the door lock of a Mercedes A-Class W169; this will work when a certain speed limit is exceeded. First we go up inside the cockpit..
Change the remote control battery on the Mercedes A-Class W169
Mercedes Classe A (2004-2012 / W169) .. the key remote control battery on the Mercedes A-Class W169, but also on the C-Class and B-Class. First we take our remote control and start by removing..
How to change the remote control battery on Mercedes A-Class W169 - C-Class W204
Mercedes Classe A (2004-2012 / W169) .. the key remote control battery on the Mercedes A-Class W169, but also on the B-Class W246 and C-Class W204. First we take our remote control and start..

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos