Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to replace the remote control battery of the Mercedes C-Class?

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Key
Operation: How to replace the remote control battery of the Mercedes C-Class?

In the event of a low battery in the remote control of the Mercedes C-Class, replacing it is a very quick and easy operation, we need a replacement battery model CR2025 and a flat-tip screwdriver. As we can see from the attached videotutorial, we start by pressing the small upper button and extract the emergency key. We insert the tip of the screwdriver into the newly released slot, as shown in the video, and unlock the rear door. Once opened we can proceed to replace the battery, respecting the right polarity.


Posted on 15 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 2000-2007 - Why does the Mercedes C-Class remote control no longer work? Read Answer
    • Classe C 2014-2021 - How much does a Mercedes C-Class key cost? Read Answer
    • Classe C 2007-2013 - How to remove the ignition lock of the Mercedes C-Class W204? Read Answer
    • Classe C 2007-2013 - What locking problems can the Mercedes C-Class boot have? Read Answer
    • Classe C 2014-2021 - What to do if the Mercedes Benz W205 car no longer detects the key? Read Answer
    • Classe C 2014-2021 - Why does the Mercedes C-Class W205 not detect the key? Read Answer
    • Classe C 2014-2021 - How to replace the ignition lock on the Mercedes C-Class? Read Answer
    • Classe C 2014-2021 - How to replace the battery in the key of a Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos