Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the "Service" Light on a Mercedes A-Class?

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Service warning light

See other generations:
Video tutorial

Start by turning on the instrument cluster without starting the engine. Once done, press the button near the engine temperature gauge three times.

This will display the current voltage of the vehicle on the multifunction screen. Next, press the down button on the multifunction steering wheel to bring up "Service Data." Then, select "Confirmation" using the minus button on the steering wheel and confirm with the multifunction button.

Once confirmed, "Full Service" will appear, and you will need to confirm again. After confirming once more, you will have successfully completed the reset.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Mercedes A-Class (also C and E)
How to Reset the Service Light on a Mercedes A-Class (also C and E)
Mercedes Classe A (2018-2026 / W177) .. how to reset the service light on a Mercedes A-Class (also C and E): turn on the ignition and use the up/down buttons located on the left side of the.. …
How to Reset the Service Light on a Mercedes-Benz A-Class
How to Reset the Service Light on a Mercedes-Benz A-Class
Mercedes Classe A (2012-2018 / W176) .. to reset the service light on a Mercedes-Benz A-Class? Follow the video. Enter the cabin, turn on the ignition (you will see the maintenance light illuminated),.. …
How to Reset the Service in a Mercedes A-Class W176?
How to Reset the Service in a Mercedes A-Class W176?
Mercedes Classe A (2012-2018 / W176) .. the service light reset on your Mercedes A-Class W176 is complete, and you can turn off the instrument cluster. Turn it back on if you want to verify.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos