Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Thermostat on a Mercedes-Benz B-Class 200

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Thermostat

See other generations:
Video tutorial

Before starting, open the bonnet to access the engine compartment. Remove the air filter and its housing by unscrewing the screws that secure it, then disconnect the hoses.

This will allow you to locate the thermostat that needs replacing. Disconnect the two hoses attached to it and also unplug the connector.

To remove the thermostat, simply unscrew and remove the three bolts that hold it in place, then pull it out of its housing. To fit the new thermostat, follow the instructions in reverse, successfully completing the replacement.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How to Replace the Thermostat of the Mercedes B-Class 200?
How to Replace the Thermostat of the Mercedes B-Class 200?
Mercedes Classe B (2011-2019 / MK 2, W246) .. and replace the thermostat of the Mercedes B-Class 200. First, raise the vehicle and begin draining the engine coolant by disconnecting the radiator.. …
Guide to replacing the thermostat of the Mercedes Class B
Mercedes Classe B (2005-2011 / MK 1, W245) Today we will see the main instructions on how to disassemble and replace the engine cooling circuit thermostat of the Mercedes Class B. First, let's…
How to Replace the Thermostat on the Mercedes B-Class
How to Replace the Thermostat on the Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) Today, let's go through the main steps to remove and replace the thermostat on the Mercedes B-Class with a diesel engine. First, open the bonnet and …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos