Do it yourself
| ||||
|
Mercedes Classe B - Video tutorial
Model: Mercedes Classe B
MK 1, W245
- Years 2005-2011 Before we can start, we will have to open the rear hood of our Mercedes B-Class. Let's start by removing the side cover of the internal trunk located near the rear light, simply by disengaging it. After that, we will have to move the relative glove compartment. By doing so, we will have reached the lamp holder of the light, which we will have to unhook from the fixing, and then extract it from the inside. Once we have extracted the lamp holder, we will have reached the burnt out bulb, which we can remove, and we will have finished the disassembly. At this point, to mount the new bulb and close everything, all we have to do is repeat these few instructions in reverse, and we will have completed the replacement.
Posted on 30 March 2024 by ScegliAuto
How to replace the rear headlight bulb of a Mercedes B-Class?
Mercedes Classe B (2005-2011 / MK 1, W245) .. replace the rear headlight bulb on a Mercedes B-Class, start by opening the rear hatch. Then, you will need to remove the access panel by unscrewing..
Replacement of the brake light bulb for the Mercedes B-Class.
Mercedes Classe B (2005-2011 / MK 1, W245) .. replace the rear stop light bulb of the Mercedes Classe B. First, we open the rear door of the trunk and start removing the side cover, thus accessing..
How to replace the left rear headlight bulb of the Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. the left rear headlight bulb on a Mercedes B-Class does not turn on, it means it needs to be replaced as soon as possible. To replace it, we need.. Other guides that may interest you
|
How to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.046
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |