Do it yourself
| ||||
|
Mercedes Slk - Video tutorial
Model: Mercedes Slk
MK 2, R171
- Years 2004-2011 The guide shows how to replace the fuel filter on petrol Mercedes SLK 200 Kompressor. The position of the latter is in the tank, accessible from the rear trunk. The first operation to perform is to remove the protective panels and the metal shields of the tank. At this point it is possible to reach the cover of the filter housing; all the fixing screws must be unscrewed and the filter can be removed. The control cable and fuel lines must be disconnected. To detach the latter it is necessary to press the two tabs on the head of the piece and pull. The central tube has a slightly different extraction method, using a small button to press. At this point it is possible to remove the gasket of the tank and it is possible to reassemble the new filter. By following the previous steps it is possible to reassemble the removed parts. The operation is finished.
Posted on 3 April 2024 by ScegliAuto
How to replace the battery in the key of the Mercedes Benz SLK 200 R171
Mercedes Slk (2004-2011 / MK 2, R171) The guide shows how to replace the remote control battery of the Mercedes Benz SLK 200 R171. The first operation to carry out is to remove the emerge
How to replace headlight bulbs on Mercedes SLK R171
Mercedes Slk (2004-2011 / MK 2, R171) In today's video we will see the steps to remove and replace the headlight bulbs on a Mercedes SLK R171, second series. First we go to open and lift
How to replace the bulbs of the Mercedes Slk r171 heating system
Mercedes Slk (2004-2011 / MK 2, R171) In this video we will show you how to replace the bulbs of the Mercedes Slk r171 heating system. Take two plastic cards and use them, as seen in the Other guides that may interest you |
Fiat Ducato 2.8 JTD gearbox oil replacementLet's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.029
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |