Do it yourself
Frequently asked questions about cars and motorcycles

Guide to Replacing the Reverse Switch on a Mercedes C-Class

Model: Mercedes Classe C W202 - Years 1993-2000

In this guide, we will cover the main instructions for disassembling and replacing the reverse switch on a Mercedes C-Class. First, get inside the vehicle and start disassembling the entire gear shift assembly, removing it from the center console; disconnect the electrical connector of the sensor found underneath. At this point, disassemble the gear shift assembly by unscrewing all the screws to access the reverse switch; replace the part with the new one, following the video tutorial to the end!

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe C (2007-2013 / W204) .. To replace the light switch of the Mercedes C-Class, you need to pry with an object in order to detach the panel on the left side of the dashboard:.. …
Mercedes Classe C (2007-2013 / W204) .. To remove the headlight switch on a Mercedes C-Class, rotate the circular plastic cover counterclockwise to completely remove it. Under the cover, you.. …
Mercedes Classe C (2000-2007 / W203) .. for replacing the lights of the Mercedes C-Class involves opening the corresponding door, in order to have access to the side part of the dashboard.. …

    Frequently Asked Questions

    • Classe C 2021-2028 - Why isn't the car radio working in a Mercedes C-Class? Read answer
    • Classe C 2007-2013 - What is the problem with the Mercedes Benz C 200 CDI? Read answer
    • Classe C 2007-2013 - How much does the Mercedes C-Class W204 B service cost? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos