Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Fuel Tank of the Mercedes Sprinter MK2

Model: Mercedes Sprinter MK 2, W906 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

See other generations:
Video tutorial

In today's video, you will see the main instructions for dismantling the fuel tank of the second generation Mercedes Sprinter. First, open the fuel flap and start unscrewing the screws found at the fuel pump inlet; then lift the vehicle and begin disconnecting the hoses connected to the fuel tank, allowing any excess fuel to drain.

At this point, use a ratchet spanner to unscrew all the screws of the tank brackets, so you can lower it from the vehicle; then replace it with the new one!


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to check the cooling system of the Mercedes Sprinter
How to check the cooling system of the Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) In this video, we will see how to check the cooling system of the Mercedes Sprinter. The tank is located on the passenger side, inside the engine com…
Positioning and disassembly of the internal fuse box of the Mercedes Sprinter.
Positioning and disassembly of the internal fuse box of the Mercedes Sprinter.
Mercedes Sprinter (2006-2018 / MK 2, W906) The information provided in this guide will show us the positioning and disassembly of the internal fuse box of the Mercedes Sprinter. First, we open…
Replacing the Alternator on the Mercedes Sprinter MK2 (906)
Replacing the Alternator on the Mercedes Sprinter MK2 (906)
Mercedes Sprinter (2006-2018 / MK 2, W906) In today's video, you will see how to remove and replace the alternator on the Mercedes Sprinter second series (906), following the instructions belo…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos