Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Button on a Mercedes W203

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Warning light – error code

See other generations:
Video tutorial

In this video, discover how to reset the service light on a Mercedes W203. Using the arrow-shaped button on the steering wheel, navigate the display until you reach the service warning. At this point, press and hold the button to the left of the speedometer, as shown at 0:25, until the message appears to hold the button for 3 seconds.

Press it again, holding it for 3 seconds. After this, the display will show a message confirming that the service interval has been reset.

This will complete the operation.


Updated on 8 June 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2000-2007 / W203) Learn how to reset the maintenance light on the instrument cluster of the Mercedes C200 CDI in the W203 version. First, turn on the ignition (without…
Mercedes Classe C (2000-2007 / W203) Resetting the service light on a Mercedes C-Class, model W203, is a simple and quick operation. To reset the light, do the following: - Turn on the i…
Mercedes Classe C (2000-2007 / W203) To reset the service light on the Mercedes C200, start by turning on the instrument cluster without starting the engine. Press the button to the left…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

    Frequently Asked Questions

    • Classe C 2000-2007 - Why did the "SRS" warning light come on in the Mercedes C-Class? Read answer

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos