Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to reset the adblue warning light on the Mercedes C-class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W205 - Years 2014-2021
Part: -board computer
Operation: How to reset the adblue warning light on the Mercedes C-class

In order to reset the warning light of the exhausted adblue, and therefore of the inability to start the engine, it is necessary to use the "autel" kit. Connect the kit to the car and wait for initialization, select the line with the indication ECM and then click on "ok", then select the "P13E500" line and click on "clear DTC", wait for the loading and then click on "continue" twice. After that you will be asked to turn off the ignition then press "ok". Finally, restart the panel and select the "reset adblue", then click on "continue". The reset procedure will then be completed.


Posted on 29 October 2022 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2014-2021 - What does the check engine light on Mercedes C-Class signal? Read Answer
    • Classe C 2014-2021 - What does the Mercedes C200 restraint system warning light mean? Read Answer
    • Classe C 2014-2021 - Where can I find the navigation updates of the Mercedes C-Class W204? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos