Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Turn Signal Bulb on a Mercedes-Benz Class A

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Light bulb

See other generations:
Video tutorial

To replace the bulb for the rear turn signal on the vehicle's rear lamp, follow these steps: open the trunk of the car, assuming you need to replace the bulb for the right rear lamp. Locate the access cover on the right side of the trunk and open it. On the back of the assembly, there is an electrical connector that needs to be disconnected.

Next, loosen the retaining clips of the bulb holder and remove it. Identify the bulb to be replaced and unscrew it. Finally, take the new bulb and secure it in the bulb holder, reposition the bulb holder in the assembly, and reconnect the power connector.


Updated on 22 June 2026 by ScegliAuto


Related tutorials

Replacing the Turn Signal Light in the Mercedes A-Class Mirror
Replacing the Turn Signal Light in the Mercedes A-Class Mirror
Mercedes Classe A (2012-2018 / W176) Today, let's go through the steps to remove and replace the turn signal bulb in the exterior rearview mirror of the Mercedes A-Class. First, move to …
How to replace the turn signal bulb in the mirror of the Mercedes A-Class.
How to replace the turn signal bulb in the mirror of the Mercedes A-Class.
Mercedes Classe A (2004-2012 / W169) These brief and simple steps will show us how to disassemble and replace the turn signal bulb of the exterior rearview mirror of the Mercedes A-Class…
How to Replace the Rear Light Bulb on a Mercedes A-Class
How to Replace the Rear Light Bulb on a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) Before you can start, open the trunk of your Mercedes A-Class. Begin by unclipping and moving the side cover of the cargo area. Then, unscrew and rem…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos