Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Windscreen Washer Reservoir on a Mercedes SLK?

Model: Mercedes Slk MK 1, R170 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Checks and maintenance

See other generations:
This video is currently unavailable

In this tutorial, see how to remove the windscreen washer reservoir on a Mercedes SLK, a very simple and quick operation. First, lift the front right side of the vehicle with a jack, taking the necessary safety precautions.

Then, remove the wheel and unscrew all the bolts and nuts securing the wing. Once done, locate the reservoir on your left, unscrew the two indicated bolts, and disconnect the upper hose.

To fit the replacement, simply follow the reverse procedure.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

How to Change the Power Steering Oil on Mercedes SLK
How to Change the Power Steering Oil on Mercedes SLK
Mercedes Slk (2004-2011 / MK 2, R171) How to maintain the steering of a Mercedes SLK? Is the steering stiff when turning? Replace the power steering oil to resolve the issue and flush the…
Instructions for Topping Up the Hood Fluid on a Mercedes SLK 1
Mercedes Slk (1997-2004 / MK 1, R170) In this guide, you will find instructions to help you top up and introduce new fluid into the hydraulic pump of the hood on the first series Mercedes…
How to Remove the Fuel Pump on Mercedes SLK Class
Mercedes Slk (2004-2011 / MK 2, R171) How to remove the floating fuel pump mounted on a Mercedes SLK Class. Start by disconnecting the battery cables, then remove the rear seat from the c…

    Frequently Asked Questions

    • Slk 2004-2011 - Why does the roof of the Mercedes SLK not close? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos