Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe E
    4. : How to replace the sidelight bulbs in Mercedes E-Class?

Mercedes Classe E - Video tutorial

Model: Mercedes Classe E W212 - Years 2009-2016
Part: Headlight bulb
Operation: How to replace the sidelight bulbs in Mercedes E-Class?

In this tutorial, we can see how to change the sidelight bulbs on your Mercedes E-Class, an extremely simple and fast operation. Before proceeding, let's make sure that the key is not inserted in order to operate in complete safety. Let's start by opening the bonnet, then identify the large cap located on the external rear area of the headlight in question and remove it. Then grab the smaller bulb holder inside the hole, pull it outwards and release it from the housing. At this point we can replace the bulb, put everything back together and repeat the operation for the opposite side if necessary.


Posted on 16 April 2023 by ScegliAuto



How to replace the headlight bulbs of a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. to replace the headlight bulbs of a Mercedes E-Class: open the front hood by pulling the lever located at the bottom right of the dashboard, let's put..
How to remove the ceiling light on Mercedes E-class
Mercedes Classe E (2002-2009 / W211) .. light (located in the roof panel) on Mercedes E class. With a screwdriver or plastic lever we go to lever between the ceiling light cover and the perimeter..
Replacement of the front headlight bulb of the Mercedes E-Class.
Mercedes Classe E (2002-2009 / W211) .. and replace the headlight bulb of the Mercedes E-Class. First, we open the engine hood of our car and start removing the plastic protective cap of the..

Other guides that may interest you

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos