Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe C
  6. : How to reset the service on the Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W202 - Years 1993-2000
Part: Instrument cluster
Operation: How to reset the service on the Mercedes C-Class

Whenever we carry out an operation to replace the oil and the relative filter on our car, we must proceed to reset the service indications that are present on the dashboard. To do this we can find the simple indications given in this description and also help ourselves with the images of the video. The first thing to do is get into the passenger compartment and sit in the driver's seat, then turn on the ignition. Locate the key located hard left of the lower instrument cluster. Press this button and keep it pressed for at least 3 seconds after which the service signal will go off.


Posted on 24 April 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 2014-2021 - What does the yellow warning light mean in the Mercedes C-Class? Read Answer
    • Classe C 2014-2021 - What do the lights on the dashboard of the Mercedes C180 mean? Read Answer
    • Classe C 2014-2021 - What does the yellow engine warning light on Mercedes C-Class W205 mean? Read Answer
    • Classe C 2014-2021 - What to do when the yellow engine failure light comes on on Mercedes C-Class? Read Answer
    • Classe C 2000-2007 - What does SRS error mean on Mercedes C class? Read Answer
    • Classe C 2000-2007 - What to do when the SRS restraint system fault light comes on on your Mercedes C-Class?? Read Answer
    • Classe C 2014-2021 - What to do when the diagnostic light comes on on the Mercedes C-Class engine? Read Answer
    • Classe C 2014-2021 - Why does the check engine light come on on the Mercedes C-Class 205? Read Answer
    • Classe C 2000-2007 - What does the ESP warning light on the Mercedes C-Class W203 mean? Read Answer
    • Classe C 2000-2007 - What does the ESP warning light on the Mercedes C-Class W203 mean? Read Answer
    • Classe C 2014-2021 - The engine light seems to be on on Mercedes C-Class, what to do? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos