Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to replace the front bumper grille of the Mercedes C-Class W204 version

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Grille
Operation: How to replace the front bumper grille of the Mercedes C-Class W204 version

Let's see how to replace the front grille of a Mercedes C-Class W204 version: first, after opening the front hood, we need to remove the cover that covers the radiator. We will have to remove two screws and also free the air tube; then just remove the side hooks and the cover can be removed together with the tube. Now we remove the two screws that hold the grill in place; now pulling up the grill comes off. Now we have to remove the emblem from the grille, starting with the chrome; on the back there are chrome latches, by pressing which we can remove the coat of arms. Now let's go and replace the grid: on e-commerce platforms there are all types and for all budgets. We found the one in the video on E-Bay for 126.43 euros, but coming from the United Kingdom, we need 55.23 euros for transport costs. We secure the grille with its screws and reassemble the cover. Job done.


Posted on 27 April 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos