Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the AdBlue Warning Light on a Mercedes

Model: Mercedes Classe C W205 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: AdBlue warning light

See other generations:
Video tutorial

To reset the AdBlue warning light using a diagnostic system, follow the instructions in this description and refer to the video images. First, connect the PC with the diagnostic program to the OBD2 port of your vehicle, enter the vehicle model and engine type, and wait for the data to load from the ECU. Then, check for any errors and select the option to reset the additive level.

This way, you can select this option and confirm with OK, and the AdBlue warning light on the dashboard will turn off.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2021-2026 / W206) To reset the AdBlue light on a Mercedes C-Class, you often just need to refill the additive fluid: the light turns on when the level of this fluid in…
Mercedes Classe C (2014-2021 / W205) To clear the AdBlue warning light from the instrument cluster of the Mercedes-Benz C-Class, you need to refill the tank by pouring the necessary amou…
Mercedes Classe C (2014-2021 / W205) Below are the main steps to reset the AdBlue warning light on the Mercedes C-Class after refilling with AdBlue fluid. First, get in the vehicle and t…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos