Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Sprinter
    4. : Replacing the diesel filter of the Mercedes Sprinter.

Mercedes Sprinter - Video tutorial

Model: Mercedes Sprinter MK 2, W906 - Years 2006-2018
Part: Diesel filter
Operation: Replacing the diesel filter of the Mercedes Sprinter.

Soon we will see the instructions that will allow us to disassemble and replace the diesel filter of the Mercedes Sprinter, in simple steps. First, we open the engine hood of our car and start removing the plastic cover of the engine; then we locate the diesel filter, disconnecting its electrical connector and the input and output lines of diesel, as shown in the video. At this point, we remove and replace the diesel filter cartridge with the new one; we then install the new original diesel filter, applying the reverse procedure!


Posted on 20 May 2023 by ScegliAuto



How do you replace the diesel filter of the Mercedes Sprinter?
Mercedes Sprinter (2006-2018 / MK 2, W906) Replacing the diesel filter of the Mercedes Sprinter is done by opening the hood, in order to access the components inside the engine compartment. He
How do you replace the fuel filter of the Mercedes Sprinter?
Mercedes Sprinter (1995-2006 / W901, MK 1) In order to replace the diesel filter of the Mercedes Sprinter, you need to open the hood so that you can access the components located inside the en
How do you replace the diesel filter on the Mercedes Sprinter?
Mercedes Sprinter (2006-2018 / MK 2, W906) In order to replace the diesel filter of the Mercedes Sprinter you have to go and open the bonnet, in order to have access to the components inside t

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos