Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the diesel fuel filter of the Mercedes Sprinter

Model: Mercedes Sprinter MK 2, W906 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Diesel fuel filter

See other generations:
Video tutorial

Today we will discover the instructions that will allow us to disassemble and replace the fuel filter of the Mercedes Sprinter, in simple steps. First, we open the hood of the vehicle and start removing the air intake duct, thus accessing the fuel filter; we then disconnect the fuel lines and the electrical connector of the sensor, as shown in the video.

At this point, we unscrew the screws of the filter bracket to remove it, replacing it with the new original one; we reassemble and connect the fuel filter, following the video tutorial until the end!


Posted on 3 July 2025 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Mercedes Sprinter?
How to Replace the Air Filter on a Mercedes Sprinter?
Mercedes Sprinter (2018-2026 / Br907, Br910, MK 3) To replace the air filter on a Mercedes Sprinter, first ensure the engine is cold. Locate the air filter box under the bonnet, at the top of the engi…
How to Replace the Air Filter in the Mercedes Sprinter 3
How to Replace the Air Filter in the Mercedes Sprinter 3
Mercedes Sprinter (2018-2026 / Br907, Br910, MK 3) If you own a Mercedes Sprinter Mk3 (2018-2023) and want to learn how to change the engine air filter, read this guide carefully and follow the descri…
Replacing the Diesel Filter on the Mercedes Sprinter
Replacing the Diesel Filter on the Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) This brief guide outlines the steps to remove and replace the diesel filter on the Mercedes Sprinter in simple steps. First, open the bonnet of your …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos