Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Mercedes C-Class?

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

As you can see in this tutorial, resetting the service light on a Mercedes C-Class is an extremely simple and quick operation. Before doing this, ensure you have completed all required scheduled maintenance tasks.

Start by inserting the key and turning on the ignition, then press and hold the call button and, a fraction of a second later, also press the "OK" button. Next, navigate to "ASSYST PLUS", select "Full service", and perform the reset by choosing "Confirm Full Service". Finally, restart the vehicle to verify that the operation was successful.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2000-2007 / W203) .. maintenance service warning of the Mercedes C-Class. First, get into the car and start the instrument panel; then press and hold the left button of.. …
Mercedes Classe C (2007-2013 / W204) .. see how to reset the service in the Mercedes C-Class, an extremely simple and fast operation to be carried out only once all scheduled maintenance work.. …
Mercedes Classe C (2000-2007 / W203) .. maintenance oil change on a Mercedes-Benz C-Class. First, get inside the vehicle and turn on the ignition. Next, press the menu button on the steering.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos