Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Engine Air Filter Housing

Model: Mercedes Classe M W163 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Air filter

See other generations:
Video tutorial

To dismantle the engine air filter box (airbox), first remove the filter: unclip the fixing tabs of the cover and disconnect the intake manifold hose to completely remove it; once the cover is off, you can extract the air filter and then proceed to dismantle the lower part of the box which is fixed to rubber supports: simply pull upwards to complete the dismantling, taking care to disconnect the side intake duct without deforming or damaging it.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Engine Air Filter Replacement
Engine Air Filter Replacement
Mercedes Classe M (1997-2005 / W163) The engine air filter housing is located on the right side of the engine bay (when viewed from the front). The cover is secured with spring clips: si…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Mercedes Classe M (1997-2005 / W163) The cabin air filter is located on the passenger side, beneath the glove compartment: you need to remove the soundproofing panel covering the air duc…
Engine Air Filter Replacement
Engine Air Filter Replacement
Mercedes Classe M (2005-2011 / W164) Open the front bonnet and ensure it is securely supported. Remove the plastic cover on the engine by disconnecting the intake ducts, and take off the…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos