Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the Fuse Diagram for the Mercedes C-Class?

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuse box

See other generations:
Video tutorial

If one of the various devices in your Mercedes C-Class suddenly stops working, the first thing to do is check the status of the respective fuses, which are indicated in this video. As shown, the first fuse box is located inside the cabin, specifically behind the outer panel of the dashboard on the driver's side.

The second box is located in the engine compartment, protected by the black plastic cover near the battery. Make sure to replace any blown fuse with a replacement of equivalent specifications.


Updated on 31 July 2026 by ScegliAuto


Related tutorials

Fuse layout and diagram of the Mercedes C-Class
Fuse layout and diagram of the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. and diagram of the fuse boxes of the Mercedes C-Class. First, open the hood of the car and remove the plastic cover found on the top right, accessing.. …
What is the fuse diagram and how to access the fuse box of a Mercedes C-Class?
Mercedes Classe C (2014-2021 / W205) .. located and how to access it in your Mercedes C-Class. In the attached video, you can see the fuse diagram. To access the fuse box, start by pulling.. …
Location and Fuse Diagram for the Trunk of the Mercedes C-Class
Location and Fuse Diagram for the Trunk of the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. of the fuse box in the trunk of the Mercedes C-Class, along with the fuse diagram. First, open the trunk lid and start removing the side cover located.. …

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos