Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Clk
    4. : Front hood disassembly instructions

Mercedes Clk - Video tutorial

Model: Mercedes Clk W208 - Years 1997-2003
Part: Bodywork
Operation: Front hood disassembly instructions

The disassembly of the front hood necessarily requires the intervention of two people to be able to support it during this maneuver; first of all start by intercepting the plastic cap located near the driver's side hinge in order to be able to open it and unhook the sockets and pipes of the glass washing system so as to free the hood during the disassembly operation; completed this maneuver, position yourself in two, one on each side of the bonnet near the hinges with the appropriate equipment to disassemble the bolts fixing the bonnet to the hinges and those of the pistons, taking care to always support the bonnet itself and finally be able to remove it completely.


Posted on 2 September 2023 by ScegliAuto



Front headlight disassembly instructions
Mercedes Clk (1997-2003 / W208) Disassembly of the front headlight unfortunately requires disassembly of the bumper in order to access the relative fixing pins; it is therefore sugg
Disassembly of the wiper nozzles
Mercedes Clk (1997-2003 / W208) If you have the habit of filling the glass washing liquid tank with water only and not with the specific detergent, it may happen that the limescale
Radiator disassembly instructions
Mercedes Clk (1997-2003 / W208) If the radiator needs to be disassembled, it is recommended to let the engine cool down since the coolant must first be drained: then start by removi

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos