Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing Radiator

Model: Mercedes Clk A208, C208, W208 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Radiator

See other generations:
Video tutorial

If you need to remove the radiator, ensure the engine has cooled down as you will first need to drain the coolant. Start by removing the splash guard located under the engine bay to access the coolant drain screw situated directly beneath the radiator.

Once the cooling system has been fully drained, proceed to remove the fan by disconnecting the power connector and unfastening the metal clips. Next, detach the hoses and pipes connected to the radiator, remove the slam panel, and finish removing the radiator by unscrewing the relevant fixing bolts.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Instructions for Dismantling the Front Headlamp
Instructions for Dismantling the Front Headlamp
Mercedes Clk (1997-2003 / A208, C208, W208) Dismantling the front headlamp unfortunately requires removing the bumper to access the relevant mounting pins; it is therefore suggested to place th…
Instructions for Removing the Mass Air Sensor
Instructions for Removing the Mass Air Sensor
Mercedes Clk (1997-2003 / A208, C208, W208) The mass air sensor, commonly known as the airflow meter, has a fundamental function: it provides the engine management unit with information regardi…
Instructions for Removing the Door Panel
Instructions for Removing the Door Panel
Mercedes Clk (1997-2003 / A208, C208, W208) To remove the door panel, first remove the insert located just above the lock, at the corner of the panel. Then, take off the plastic cover around th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos