Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Clk
    4. : Door panel removal instructions

Mercedes Clk - Video tutorial

Model: Mercedes Clk W208 - Years 1997-2003
Part: Door panel
Operation: Door panel removal instructions

In order to disassemble the door panel, you must first remove the inserts immediately above the lock, at the edge of the panel, and then remove the plastic covering at the lock itself; then unhook the cap on the leather insert and the grip of the internal handle to unscrew the screws below; at this point, release the pressure clips along the edges of the panel (use a plastic lever to avoid scratching the bodywork) to move it away from its seat and disconnect the cable from the opening handle to complete disassembly


Posted on 19 August 2023 by ScegliAuto



Door panel molding removal instructions
Mercedes Clk (1997-2003 / W208) In order to remove the molding on the door panel (in this case with a briar effect finish) it is first necessary to remove the door panel: removing t
How to disassemble the front door panel of the Mercedes CLK
Mercedes Clk (2002-2010 / W209) Today's steps will show us the process of disassembling the front door panel of the Mercedes CLK. First, we open the front door of the car and start
How to remove the door panel of a Mercedes Clk
Mercedes Clk (2002-2010 / W209) Let's see how to remove the door panel (front left) of a Mercedes Clk. We disconnect the battery terminals in the engine compartment; with a screwdri

Other guides that may interest you

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos