Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Clk
    4. : Removing the car bumper

Mercedes Clk - Video tutorial

Model: Mercedes Clk W208 - Years 1997-2003
Part: Bodywork
Operation: Removing the car bumper

One of the most common replacements in automobiles is that of car bumpers. Knowing how to disassemble a bumper by yourself and replace a spare part will bring great savings in terms of money and time. The following guide shows how to replace it. All you need is a wrench, screwdrivers and gloves. Once you have parked your car in a safe location, you can begin to proceed. When opening the boot lid, you will find some fixing screws which must be removed. Once the screws have been removed, the plastic hooks that hold the bumper attached to the body can be removed.


Posted on 3 September 2023 by ScegliAuto



How to remove the rear bumper on Mercedes Clk
Mercedes Clk (1997-2003 / W208) Removing the rear bumper of the Mercedes Clk? Let's see how it disassembles. We open the tailgate, remove the cloth lining in the luggage compartment
Front headlight disassembly instructions
Mercedes Clk (1997-2003 / W208) Disassembly of the front headlight unfortunately requires disassembly of the bumper in order to access the relative fixing pins; it is therefore sugg
How to remove Merces Clk headlights
Mercedes Clk (2002-2010 / W209) Don't know how to remove the headlights of your car? In this video we see carefully how to do it. First, let's unscrew the pins to the left of the pl

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos