Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Dismantling the Front Headlamp

Model: Mercedes Clk A208, W208, C208 - Years 1997-2003
Part: Headlight

Dismantling the front headlamp unfortunately requires removing the bumper to access the relevant mounting pins; it is therefore suggested to place the vehicle on suitable car stands to remove the front wheels and gain more manoeuvring space; at this point, remove the plastic wheel arch liner inside the wheel arches by taking out both the screws and the push clips; you can then continue with the dismantling of the front bumper by removing the relevant fixing screws and disconnecting the side indicator lamp holders and the fog light connectors; finally, complete the dismantling of the headlamps.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Front Headlight Bulb on a Mercedes CLK
How to Change the Front Headlight Bulb on a Mercedes CLK
Mercedes Clk (2002-2010 / W209, A209, C209) Change the damaged bulb in the front headlight? Here’s how to remove it from a Mercedes CLK. Open and lift the front bonnet by pulling the lever loca…
Instructions for Removing the Bonnet
Instructions for Removing the Bonnet
Mercedes Clk (1997-2003 / A208, W208, C208) Removing the bonnet requires the assistance of two people to support it during this procedure. Start by locating the plastic cap near the hinge on th…
How to Replace the Front Headlight Bulb on the Mercedes CLK
How to Replace the Front Headlight Bulb on the Mercedes CLK
Mercedes Clk (2002-2010 / W209, A209, C209) Replacing the front headlight bulb on a 2007 Mercedes CLK is a very simple task that you can perform independently. Start the procedure by opening th…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos