Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp of Your Car

Model: Mercedes Clk A208, C208, W208 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Headlight

See other generations:
Video tutorial

This guide shows how to replace the front headlamp of your car. First, purchase a new headlamp from a dealer. If the car has been running, wait before starting work.

Open the bonnet and secure it with the prop rod. The headlamp to be replaced is attached to the body with screws and connected to the battery with wires. First, disconnect the connectors of the headlamp wires, which are usually easily visible.

Next, use a cross-head screwdriver to remove the screws securing the headlamp to the body. You can then remove the headlamp.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on the Mercedes CLK
How to Replace the Front Headlight Bulb on the Mercedes CLK
Mercedes Clk (2002-2010 / A209, C209, W209) Replacing the front headlight bulb on a 2007 Mercedes CLK is a very simple task that you can perform independently. Start the procedure by opening th…
Replacing the Front Indicator Bulb
Replacing the Front Indicator Bulb
Mercedes Clk (1997-2003 / A208, C208, W208) The front indicator bulb is integrated within the headlamp and replacing it is fairly simple, but it is necessary to remove the air filter housing fo…
Replacing the Front Fog Light Bulb
Replacing the Front Fog Light Bulb
Mercedes Clk (1997-2003 / A208, C208, W208) To replace the front fog light bulb (H1 fitting), you must lift the vehicle to remove the front wheel and then the wheel arch liner to easily access …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos