Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Wiper Blade

Model: Mercedes Gl X164, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Windshield wipers

See other generations:
Video tutorial

Replacing the rear wiper blade is a maintenance task that is often neglected but is essential when reversing and the rear screen is particularly dirty. To replace the blade, simply lift the wiper arm, rotate the blade approximately 90 degrees, and pull it outward to release it. Ensure that the new blade has the same length and type of attachment, bring it close to the arm, and press it to fit perfectly into its seat: once activated, you will immediately see the benefits of the new blade.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Where are the Fuses in a Mercedes GL?
Where are the Fuses in a Mercedes GL?
Mercedes Gl (2006-2012 / X164, MK 1) Each fuse in the Mercedes GL is located inside one of the dedicated fuse boxes present in the vehicle: in this type of vehicle, there are three boxes…
Removal of the rear bumper of the Mercedes GL
Removal of the rear bumper of the Mercedes GL
Mercedes Gl (2006-2012 / X164, MK 1) Today's main instructions will allow us to disassemble and replace the rear bumper of the Mercedes GL. First, we open the rear trunk door and start u…
Locating Fuse Boxes on Mercedes GL X164
Locating Fuse Boxes on Mercedes GL X164
Mercedes Gl (2006-2012 / X164, MK 1) In this video, we see where the fuse boxes are located on the Mercedes GL X164: the box inside the cabin is positioned under the left rear passenger …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos