Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Clk
    4. : How to remove the radio of the Mercedes Clk

Mercedes Clk - Video tutorial

Model: Mercedes Clk W209 - Years 2002-2010
Part: Car stereo
Operation: How to remove the radio of the Mercedes Clk

In order to disassemble the original car radio it is necessary to remove some of the elements of the center console; start by unhooking and removing the frame at the base of the gear lever to then extract the ash laying; at this point unscrew the fixing screws present at the base of the air conditioner controls to then be able to remove them; in the same way, release the push-button panel above the car radio (the one where the parking arrow button is located); at this point it is possible to access the four fixing screws of the radio itself and then unscrew them to be able to extract it from its seat.


Posted on 7 September 2023 by ScegliAuto



Mercedes Clk car radio disassembly
Mercedes Clk (2002-2010 / W209) How to disassemble and replace the car stereo on Mercedes Clk? Let's see how it disassembles. Remove the ashtray with a plastic lever (placed under t
How to disassemble the car stereo of a Mercedes CLK
Mercedes Clk (2002-2010 / W209) How to remove the radio (navigator) of a Mercedes CLK? Let's see carefully how to proceed. With a plastic (metal) lever, we remove (by levering) the
Where are the fuses located in the Mercedes CLK?
Mercedes Clk (1997-2003 / W208) The fuses of the Mercedes CLK are divided inside the appropriate fuse boxes that are installed on the vehicle: in this type of car, it is possible to

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos