Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How do you reset the panoramic roof of the Mercedes E-Class?

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Warning Light - Car Error Code

To reset the panoramic roof of the Mercedes E-Class, you need to use the button located near the interior lights. Before using this button, you need to turn on the instrument panel. At this point, you need to pull down this button for a few seconds. Then, you need to push it up for a few seconds and then repeat the process by pulling down the button again. This way, the panoramic roof will be reset, and you will be able to adjust its movement using the same button.


Posted on 2 October 2023 by ScegliAuto



How do you reset the panoramic roof of the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. To reset the panoramic roof on the Mercedes E-Class, you will need to use the button located near the interior light console: before pressing this..
How do you replace the panoramic roof of the Mercedes E-Class?
Mercedes Classe E (1995-2002 / W210) .. to replace the panoramic roof of the Mercedes E-Class, it will be necessary to push it upwards from inside the cabin, so that the roof lifts up at its..
Removal of panoramic roof on Mercedes E-Class W210
Mercedes Classe E (2002-2009 / W211) .. remove the panoramic roof on a Mercedes Benz E-Class W210. First of all, we get on board the car and start by removing the ceiling light from the passenger..

    Frequently Asked Questions

    • Classe E 1995-2002 - How do you reset the air conditioning on Mercedes E-Class? Read Answer

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos